Please use this identifier to cite or link to this item: https://sci.ldubgd.edu.ua/jspui/handle/123456789/6491
Full metadata record
DC FieldValueLanguage
dc.contributor.authorСинельніков, Олександр Дмитрович-
dc.date.accessioned2020-02-12T08:06:33Z-
dc.date.available2020-02-12T08:06:33Z-
dc.date.issued2019-
dc.identifier.urihttp://hdl.handle.net/123456789/6491-
dc.description.abstractIntroduction: Increasing number of vehicles corelates with an increase in car accidents’ risk which pose a threat of environment contamination. Therefore, this study was undertaken to analyze the sorption process for two vehicle fluids contacted with sand. Methods and findings: Sorption process was analyzed with the use of dedicated experimental set-up in the laboratory scale. Contact of sand (50cm 3 ) with 100cm 3 of two sorbates (brake fluid–BF and diesel–D) with the following properties: pure BF, pure D, 0.75–BF and 0.25–D, 0.5–BF and 0.5–D, 0.25–BF and 0.75–D were investigated. Finally, non-linear regression for the mathematical description of sorption process was prepared. The results indicated that the higher amount of D in mixture the higher absorption of sorbate by sand. Moreover, the highest sorption was recorded for pure BF and the lowest for the mixture of equal amount of BF and D. Furthermore, analysis of absorbed mixtures volume indicated that for the composition of 0.25–BF and 0.75–D, 29ml of liquid was absorbed. While, for the equal amount of brake fluid and diesel 30ml of liquid was absorbed. Finally, for the composition of 0.75–BF and 0.25–D, 27ml of liquid was absorbed.uk
dc.language.isoenuk
dc.subjectSorption of vehicle liquidsuk
dc.titleAnalysis of sorption of vehicle liquids with sand that appear after car accidents reproduced in laboratory scaleuk
dc.typeOtheruk
Appears in Collections:2019



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.